Type	Digital-to-Analogue Converter
Color	Silver or Black
Dimensions	(W) 460mm x (D) 405mm x (H) 73mm (W) 18.0” x (D) 15.9” x (H) 2.9” Allow extra depth for cable connectors
Mechanism	N/A
Weight	11.3kg/24.9lbs.
Converter Type	Patented dCS Ring DAC topology, oversampling to 5 bits at 2.822 or 3.07 MS/s
Analogue Outputs	O utput Levels: 2V rms or 6V rms on all outputs for a full-scale input, set in the menu. B alanced Outputs - 1 stereo pair on 2x 3-pin male XLR connectors (pin 2 = hot, pin 3 = cold) These outputs are electronically balanced and floating, the signal balance ratio at 1kHz is better than 40dB Output impedance is 3Ω maximum load is 600Ω(a 10kΩ load is recommended). U nbalanced Outputs - 1 stereo pair on 2x RCA Phono connectors. Output impedance is 52 Ω Ω Ω load is recommended).
Digital Outputs	IEEE 1394 interface on 2x 6-way connectors. The interface accepts dCS-encrypted DSD (1 bit data at 2.822MS/s). 2x AES/EBU on 3-pin female XLR connectors. Each will accept up to 24 bit PCM at 32, 44.1, 48, 88.2 & 96kS/s. OR as a Dual AES pair at 88.2, 96, 176.4 or 192kS/s. 3x SPDIF on 2x RCA Phono and 1xBNC connectors. Each will accept up to 24 bit PCM at 32, 44.1, 48, 88.2 & 96kS/s 1x SPDIF optical on a Toslink connector, will accept up to 24 bit PCM at 32, 44.1 & 48kS/s. 1x SDIF-2 interface on 2x BNC connectors, will accept up to 24 bit PCM at 32, 44.1, 48, 88.2 & 96kS/s or SDIF-2 DSD (auto-selected). If the unit is not in Master mode, this interface requires a compatible word clock input, locked to the data rate.
Word Clock I/O	Word Clock Input on 1xBNC connector. Accepts standard word clock at 32, 44.1, 48, 88.2 & 96kHz. The data rate can be the same as the clock rate or an exact multiple (0.5x, 1x, 2x, 4x) of the clock rate. Sensitive to TTL levels. Word Clock Output on 1xBNC connector. In Master mode, a TTL-compatible 44.1kHz word clock is available
Residual Noise	Better than –110dB0 @ 20Hz - 20kHz unweighted. (6V Setting).
Spurious Responses	B etter than –100dB0 @ 20Hz - 20kHz.
Filters	P CM mode - 4 filters give different trade-offs between the Nyquist image rejection and the phase response 2 extra asymmetrical filters are available at 176.4 kS/s and 192 kS/s. D SD mode - 4 filters progressively reduce out-of-audio band noise level (inherent in the 1-bit nature of DSD).
Software Updates	Updates loaded by CD-R
Local Control	P hilips Pronto™ programmable remote control is supplied with the Transport, or RS232.
Power Supply	Factory set for 115 V AC, 60Hz.
Power Consumption	22 Watts typical/ 30 Watts maximum.